This is the radio controlled, electric powered, Ready-To-Fly
FlyZone Diablo Ducted Fan Jet Trainer.
**Optional Dual Power Pod with two preinstalled Brushed**
motors plugs into existing power system and offers even more power
and speed for experienced fliers.
**Optional advanced wing offers more**
aerobatic maneuvers with dual servo aileron control.
FEATURES: Construction: AeroCell foam-extremely durable and easy to repair
lightweight with factory painted finish and applied decals
Wing: Aerocell construction, beginner configuration
Ducted Fan System: HyperFlow system for tremendous thrust and hyper
speeds, preinstalled Brushed motor
Radio: Tactic 4-channel FM with preinstalled receiver, servos and
Electronic Speed Control. Also features trainer system that
when used with another Tactic or Futaba transmitter can transfer
control to another pilot for learning purposes. Trainer Cord
is not included and must be purchased separately,
Battery: ElectriFly 3S 11.1V 1500mAh LiPo
Charger: ElectriFly balancing charger with AC/DC adapters
Landing Gear: None, model must be hand launched and is belly landed
INCLUDES: FlyZone Diablo Ducted Fan Jet Trainer, 4-channel Tactic radio, ESC,
HyperFlow Ducted Fan system, ElectriFly 3S 11.1V 1500mAh LiPo pack,
AC/DC balancing charger and manual
REQUIRES: AA Batteries: Eight for transmitter
SPECS: Wingspan: 40.25" (1020mm)
Wing Area: 320 sq in (20.6 sq dm)
Length: 39" (995mm)
CG (Center of Gravity): 2" (51mm) - 2.5" (64mm) back from the leading
edge of the wing
Control Throws-
Rudder, Left and Right: 7/16" (11mm)
Elevator, Up and Down: 1/4" (6.4mm)
COMMENTS: Some points on the Power Pods and motor systems-
**For a single Inrunner Brushless motor upgrade, order;
ElectriFly Ammo 20-40-3500kV Brushless Motor
HyperFlow 370 EP Ducted Fan Adapter )
3.5 Male Bullet to 2mm Female Bullet Adapter
ElectriFly Silver Series 25A Brushless ESC
**The Dual EDF Power Pod includes two preinstalled Brushed motors and
can be used with the beginner or advanced wing
**The Inrunner Brushless motor mentioned above can also be used in
the Dual EDF Power Pod however two Brushless ESCs and a larger
battery are required. Please review the HyperFlow instruction
manual for explanations on installation
