This is the radio controlled, electric powered, Almost-Ready-to-Fly, Great Planes ElectriFly Riot 3D Sport Aerobatic Airplane. Recommended for modelers with a good amount of low wing experience. For ages 14 and up.
FEATURES: Construction: Laser cut balsa and plywood Wings: One-piece all wood Covering: Factory applied high quality heat shrink film, Transparent Yellow in color Decals: Four sheets to replicate several trim schemes Radio Compartment: Located on bottom of fuselage Wheels: 1¼" (32mm) diameter, rigid plastic low bounce Landing Gear: Pre-bent wire 1.5" (38mm) diameter Wheel Pants: Plastic Canopy: Clear Aileron Control: Single servo in bottom wing controls lower and upper ailerons with dual linkage Building Time: Ready to fly in only 3-4 hours. Warranty: Great Planes Model Manufacturing Company guarantees this kit free from defects in both materials and workmanship at the date of purchase.
INCLUDES: Pre-built and covered wings, fuselage and tail assemblies, pushrods, pre-bent landing gear, wheels, wheel pants, canopy, photo- illustrated instruction manual and decals
REQUIRES: Radio: 4-Channel Servos: 3-Micro (1-Aileron, 1-Elevator, 1-Rudder) Motor: RimFire 28-22-1380kV Brushless Outrunner, Battery: 3-cell LiPo Battery Charger: LiPo compatible LiPo Cell Balancer, Electronic Speed Control: 8A micro, Slo-Flyer Propeller: 8x3.8, Misc. Items: Building and field equipment
SPECS: Wingspan: 20.5" (515mm) Wing Area: 235 sq in (15.2 sq dm) RTF Weight: 7.4oz (210-225g) Wing Loading: 4.5 - 4.9oz/sq ft (14 - 15g/sq dm) Length: 22.75" (580mm) Airfoil: Fully-Symmetrical Center of Gravity: 2-5/16" (58mm) Back from the leading edge of the top wing Control Throws- High Rate Low Rate 3D Elevator: Up & Down ½" (13mm) 3/8" (9.5mm) 1-3/8" (35mm) Rudder: Right to Left 1-3/8" (35mm) 1" (25mm) 2" (51mm) Ailerons: Up & Down 5/8" (16mm) 3/8" (9.5mm) 2" (51mm
