This is the radio controlled, electric powered, almost-ready-to-fly, Great Planes ElectriFly E-Performance Series Extra 330S Park Flyer Airplane. For Intermediate Modeler/Fliers at least 14 years of age.
FEATURES: Construction: Laser cut balsa and plywood Wings: Factory covered, built-up wood with oversized ailerons Tail section: Factory covered, built-up wood construction with over- sized control surfaces Covering: Factory applied lightweight film Cowl: Fiberglass construction, factory painted to match covering Battery and Motor Compartment: Magnetic latches elimimate screw fasteners for cleaner appearance and better aerodynamics Landing Gear: Formed aluminum Wheel Pants: Vacuum formed plastic, factory painted Wheels: Lightweight 1.77" (45mm) diameter foam wheels Spinner: 1.77" (45mm) diameter, plastic construction Hardware: Molded from composite materials for precise response and weight savings Building Time: Ready to fly in only 6-8 hours. Warranty: Great Planes Model Manufacturing Company guarantees this kit free from defects in both materials and workmanship at the date of purchase.
INCLUDES: Pre-built and covered wings, fuselage and tail assemblies, pushrods, hardware and instruction manual
REQUIRES: The ElectriFly Park Flyer E-Performance Power System includes the following required components in one package Silver Series 35A Brushless Electronic Speed Control 35-30-1250kV Brushless Outrunner Electric Motor LiPo 2100mAh 11.1V 20C Battery Pack w/Balance Connector
Propeller: 10x7E Battery Charger: LiPo compatible - Radio: 4-channel with micro receiver and servos OR 6-channel with micro receiver Servos: Two micro size - radio listed above includes two (four total required) Servo Extensions: Two 6" (150mm) slim wire Two 16" (400mm) Dual Servo Extension: Misc. Items: Building and field equipment
SPECS: Wingspan: 41" (1035mm) Wing Area: 337 sq in (21.8 sq dm) Weight: 27-31oz (765-880g) Wing Loading: 11.5-13.2 oz/sq ft (35-40 g/sq dm) Length: 40" (1015mm) Center of Gravity: 2-3/4" (70mm) Back from the wing's leading edge at the fuselage Control Throws- High Rate Low Rate 3D Rate Elevator: Up & Down 5/8" (16mm) 5/16" (8mm) 1¼" (32mm) Rudder: Right to Left 2½" (64mm) 1¼" (32mm) 3" (76mm) Ailerons: Up & Down ¾" (19mm) 7/16" (11mm) 1¼" (32mm
